For finishing the process, remove the syringe. Afterwards, the pedestal and disc have to be removed using a razor. If there is any front window repair compound still present, then use the razor for cleaning it but do it very carefully so that the glass with not get scratched.
Park your vehicle in a garage or under a shelter. If possible, park your vehicle in an area where it will be insulated from the harsh environment. This will not only protect it from ice, but from falling limbs or other hazards this time of year.
Now open the windshield front window repair kit, it contains an adhesive disc. Place it in the middle of the chip and the disc's tab must be pointing towards you. The pedestal from the kit has to be placed on the tab.
If you don't windshield chip repair hear anything at all there may be a loose corroded or broken wire somewhere in the circuit. Start at the fuse box and trace the wire to the window switch. You can do this with a voltmeter or a 12 volt test light. If you have 12 volts going into the switch, but no voltage coming out of the switch when you press the button, the switch is probably faulty. If 12 volts is coming out of the switch, then the problem is either in the wiring from the switch to the window motor or the motor itself.
Honest answers to these questions will provide you with a list of problem area's requiring thought and action. Divide your list into three main areas with the headings Clean, Repair and Replace.
Step 7 - Remove the finishing film after a 10 minute period and make sure the resin had dried completely. Scrape away any excess resin from the surface.